FixVault
Home › Cadillac › 2000 › Seville STS › Repair and Diagnosis › External Pages › Different car › Section 136 (Theft Deterrent System) › Repair Instructions › Theft Deterrent Exciter Module Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the ignition lock cylinder. Refer to IGNITION SWITCH LOCK CYLINDER REPLACEMENT (LHD) or IGNITION SWITCH LOCK CYLINDER REPLACEMENT (RHD) .
  2. Remove the bezel from the ignition lock cylinder, by releasing the retainers.
    Fig 1: Removing Bezel
    G01797204Courtesy of GENERAL MOTORS CORP.
  3. Slide the reader/exciter (4) from the ignition lock cylinder housing (1).
    Fig 2: Ignition Lock Cylinder Housing
    G01797205Courtesy of GENERAL MOTORS CORP.
About FixVault