FixVault
Home › Cadillac › 2000 › Seville STS › Repair and Diagnosis › External Pages › Different car › Section 211 (Lighting Systems) › Repair Instructions › Underhood Lamp Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Cadillac Eldorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the underhood lamp (1) to the inner hood panel (4).
    NOTE: Refer to FASTENER NOTICE .
  2. Install the fasteners (2) in order to retain the underhood lamp (1) to the inner hood panel (4).

    Tighten 

    Tighten the fasteners to 2 N.m (18 lb in).

  3. Connect the electrical connector (3).
  4. Close the hood.
    Fig 1: Underhood Lamp, Fasteners, Electrical Connector & Inner Hood Panel
    G01664736Courtesy of GENERAL MOTORS CORP.
About FixVault