Adding Keys
NOTE:
A VATS/PASS-Key(R) interrogator (J-35628-A) and terminal adapters are required for this procedure. When servicing PASS-Key(R) II system, obtain all vehicle ignition keys. Verify key code values with VATS/PASS-Key(R) interrogator (J-35628-A).
- In order to copy a PASS-Key(R) II ignition key, determine necessary key code or resistance value.
- Determine master ignition key code using VATS/PASS-Key(R) interrogator (J-35628-A) as outlined in this following procedure:
- Turn VATS/PASS-Key(R) interrogator (J-35628-A) on.
- Insert key into tool lock cylinder.
- Note measured key code of master ignition key as displayed on key code reader.
- Obtain a key blank matching key code.
- Cut key blank to match original key.