Code Enable Criteria
NOTE:
Intake Air Temperature (IAT) sensor is integral to MAF sensor. MAF sensor may also be referred to as MAF/IAT sensor.
- DTC P0102, P0103, P0106, P0107, P0108, P0121, P0122, P0123, P0401, P1122 or P1441 is not set.
- Engine is running.
- Ignition 1 signal is 11-18 volts.
- Throttle Position (TP) sensor angle is less than 47.9 percent.
- TP sensor is steady within a range of less than 2.9 percent.
- Manifold Absolute (MAP) sensor signal is steady and less than 8.48 psi (58.5 kPa).
- Exhaust Gas Recirculation (EGR) position sensor signal is less than 90 percent.
- Evaporative Emission (EVAP) purge solenoid command is less than 90 percent.
- Traction control status is inactive.
- Listed conditions are exist for at least 10 seconds.