FixVault
Home › Cadillac › 2002 › DeVille Base › Repair and Diagnosis › Steering › Steering Wheel And Steering Column › Repair Instructions › Multifunction, Turn Signal Switch Replacement › Installation Procedure

Installation Procedure

  1. Connect the multifunction switch electrical connectors.
  2. Install the multifunction switch to the steering column.
    CAUTION: Refer to FASTENER NOTICE .
  3. Install the multifunction switch retaining screws.

    Tighten 

    Tighten the multifunction switch retaining screws to 7 N.m (62 lb in).

  4. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement - On Vehicle (Power Tilt)  or Steering Column Trim Covers Replacement - On Vehicle (Manual Tilt) .
  5. Enable the SIR system. Refer to ACTIVATING SYSTEM .
    Fig 1: Installing Multifunction Switch
    G01602658Courtesy of GENERAL MOTORS CORP.
About FixVault