FixVault
Home › Cadillac › 2002 › Escalade EXT › Repair and Diagnosis › Body & Frame › Windows › Door System, Mirror System & Window System › Repair Instructions › Power Door Lock Switch Replacement - Rear › Removal Procedure

Removal Procedure

  1. Remove the upper garnish molding. Refer to GARNISH MOLDING REPLACEMENT - REAR UPPER (TAHOE/YUKON/ESCALADE/SUBURBAN) or GARNISH MOLDING REPLACEMENT - REAR UPPER (AVALANCHE/ESCALADE EXT) .
    2. Fig 1: D-Pillar Molding
    GM666546Courtesy of GENERAL MOTORS CORP.
  2. Remove the D-Pillar molding.
  3. Disconnect the electrical connectors.
    4. Fig 2: Rear Power Door Lock Switch Tabs
    GM666547Courtesy of GENERAL MOTORS CORP.
  4. Push on the tab (2) in order to remove the switch from the D-Pillar molding.
  5. Insert a small screwdriver between the tab (1) in order to pry out the switch from the case.
About FixVault