FixVault
Home › Cadillac › 2002 › Escalade EXT › Repair and Diagnosis › Body & Frame › Windows › Stationary Window System › Repair Instructions › Windshield Upper Reveal Molding Replacement › Removal Procedure

Removal Procedure

    CAUTION: Refer to GLASS & SHEET METAL HANDLING CAUTION .
  1. Remove both right and left sides of the reveal molding. Refer to Windshield Side Reveal Molding Replacement .
    2. Fig 1: View Of Window Reveal Molding
    GM301108Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The windshield reveal molding fills the cavities between the body and windshield. If the reveal molding is stretched or damaged, replace the molding.
  2. Remove the upper windshield reveal molding.
    1. Use a flat-bladed tool in order to carefully pry the end of the upper reveal molding out about 76 mm (3 in).
    2. Grasp the corner of the windshield reveal molding by hand or use a suitable tool to slowly pull the molding away from the windshield.
    3. If the molding will not release, use a utility knife to release the molding.
About FixVault