FixVault
Home › Cadillac › 2002 › Escalade EXT › Repair and Diagnosis › Engine Mechanical › Cooling System (Mechanical) › Engine Cooling System › Repair Instructions › Fan Replacement › Installation Procedure

Installation Procedure

CAUTION: Do not use or attempt to repair a damaged cooling fan assembly. Replace damaged fans with new assemblies. An unbalanced cooling fan could fly apart causing personal injury and property damage.
    Fig 1: View Of Fan Clutch & Fan Blade
    GM367006Courtesy of GENERAL MOTORS CORP.
  1. Install the fan clutch bolts.
  2. Install the fan clutch onto the fan blade, if necessary.
    NOTE: Refer to FASTENER NOTICE .
  3. Install the fan clutch bolts.

    Tighten:  Tighten the bolts to 23 N.m (17 lb ft).

    4. Fig 2: View Of Fan Assembly Removed
    GM367004Courtesy of GENERAL MOTORS CORP.
  4. Install the fan blade.
    5. Fig 3: Using Special Tools For Fan Clutch
    GM362333Courtesy of GENERAL MOTORS CORP.
  5. Install the J 46406  and the J 41240-5A  to the fan clutch.

    Tighten:  Tighten the fan clutch nut clockwise to 56 N.m (41 lb ft).

  6. Install the upper fan shroud. Refer to FAN SHROUD REPLACEMENT - Upper (W/O M74)  or FAN SHROUD REPLACEMENT - Upper (W/M74) .
About FixVault