FixVault
Home › Cadillac › 2002 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 1219 (Disc Brake System) › Repair Instructions › Brake Caliper Bracket Replacement - Rear › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Brake Caliper Bracket Bolts (1)
    GM450514Courtesy of GENERAL MOTORS CORP.
  1. Install the brake caliper bracket to the suspension knuckle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the two NEW brake caliper mounting bracket bolts (1) and washers.

    The new brake caliper mounting bracket bolts will come with an adhesive already applied to the threads.

    Tighten:  Tighten the brake caliper mounting bracket bolts to 175 N.m (125 lb ft).

  3. Lubricate the brake caliper pin bolts with high temperature silicone lubricant.
    4. Fig 2: Removing/Installing Front Brake Pads
    GM727773Courtesy of GENERAL MOTORS CORP.
  4. Install the brake pad retainers (2) to the brake caliper bracket (3).
  5. Install the brake pads (1) to the brake caliper bracket (3).
  6. Install the brake caliper. Refer to Brake Caliper Replacement - Rear .
About FixVault