Transmission Control Module (TCM) Will Not Communicate With Non-Tech2 Service Or Test Equipment (Reprogram The TCM) (02-07-30-033A)
Publication date: 2002-11-01Reference number: 02-07-30-033A
Supersedes refnos: 02-07-30-033
TRANSMISSION CONTROL MODULE (TCM) WILL NOT COMMUNICATE WITH NON-TECH2 SERVICE OR TEST EQUIPMENT (REPROGRAM THE TCM)
TECHNICAL SERVICE BULLETIN
Reference Number(s): 02-07-30-033A, Date of Issue:
November 2002
Superceded Bulletin(s): 02-07-30-033
| CADILLAC: | 2003 CTS Built Prior to VIN Breakpoint 30116928 |
| SECTION: | Section 07-Transmission/Transaxle |
NOTE:
This bulletin is being revised to correct the Labor Time Operation. Please discard Corporate Bulletin Number 02-07-30-033 (Section 07-Transmission/Transaxle).
CONDITION
Some customers may comment that their vehicle is unable to be properly serviced or tested due to the inability of non-Tech 2(R) service or test equipment to communicate with the vehicle's TCM.
CAUSE
Some non-Tech 2(R) service and test equipment may be unable to establish communication with the vehicle's on board TCM.
CORRECTION
Re-program the vehicle TCM using the SPS programing procedure, TIS 2000, software version 6.5 or newer.
WARRANTY INFORMATION
For vehicles repaired under warranty, use:
WARRANTY INFORMATION
| Labor Operation | Description | Labor Time |
|---|---|---|
| K5364 | Module Reprogram-TCM | 0.4 hr |