Installation Procedure

Install the O-ring (3).
Install the concentric slave cylinder (2).
NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
Install the 3 concentric slave cylinder bolts (1) and the quick connect bolt (5).
Tighten

Tighten the 3 concentric slave cylinder bolts (1) to 20 N.m (15 lb ft).

Tighten

Tighten the quick connect bolt (5) to 10 N.m (89 lb in).

Fig 1: Installing Concentric Slave Cylinder
Courtesy of GENERAL MOTORS CORP.
Install the transmission. Refer to TRANSMISSION REPLACEMENT in Manual Transmission - M35.