Installation Procedure

If the antenna cable is to being replaced, install the antenna cable clips (3) from the antenna cable removed from the vehicle.
Install the antenna cable to the roof beams with the clips (3).

Fig 1: Installing Antenna Cable Clips
Courtesy of GENERAL MOTORS CORP.
Connect the radio antenna connection (1) at the front of the vehicle.

Fig 2: Connecting Radio Antenna Connection
Courtesy of GENERAL MOTORS CORP.
Connect the antenna cable (3) to the antenna module (1) at the rear of the vehicle.
Install the headliner. Refer to HEADLINER REPLACEMENT (W/CF5) or HEADLINER REPLACEMENT (W/O CF5)
Install the sail panel. Refer to SAIL PANEL REPLACEMENT
Install the windshield garnish molding. Refer to GARNISH MOLDING REPLACEMENT - WINDSHIELD PILLAR

Fig 3: Connecting Antenna Cable To Antenna Module
Courtesy of GENERAL MOTORS CORP.