FixVault
Home › Cadillac › 2003 › Escalade EXT › Repair and Diagnosis › Body & Frame › Frames, Subframes & Crossmembers › Frame And Underbody › Repair Instructions › Engine Protection Shield Replacement › Installation Procedure

Installation Procedure

  1. Install the shield to the vehicle. 15 Series is shown, 25 Series is similar.
    NOTE: Refer to FASTENER NOTICE in GM VEHICLES CAUTIONS & NOTICES .
  2. Install the shield to frame bolts.

    Tighten 

    Tighten the bolts to 20 N.m (15 lb ft).

    Fig 1: Installing Shield To Frame Bolts
    G03384605Courtesy of GENERAL MOTORS CORP.
About FixVault