FixVault
Home › Cadillac › 2003 › Escalade EXT › Repair and Diagnosis › Drivelines & Axles › Differentials & Drive Axles › Front Drive Axle › Repair Instructions › Shield Replacement › Installation Procedure

Installation Procedure

  1. Install the front differential carrier shield.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the front differential carrier shield bolts.

    Tighten 

    Tighten the front differential carrier shield bolts to 20 N.m (15 lb ft).

  3. Lower the vehicle.
    Fig 1: Installing Front Differential Carrier Shield Bolts
    G01455810Courtesy of GENERAL MOTORS CORP.
About FixVault