FixVault
Home › Cadillac › 2003 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 446 (Seat System) › Repair Instructions › Module Replacement - Seat Climate Control - Rear Seat › Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the seat cushion in the forward position.
  2. Release the seat cushion trim cover J channel along the lower edge of the trim cover. Refer to Seat Cushion Cover and Pad Replacement - Rear (60/40 Split - 50/50 Split)  or Seat Cushion Cover and Pad Replacement - Rear (Bench) .
  3. Disconnect electrical connections (3) from the seat climate control module (1).
  4. Note the location of the tie straps (2) securing the climate control module.
  5. Remove the tie straps (2) securing the module to the seat cushion frame.
  6. Remove the module from the seat cushion frame.
    7. Fig 1: View Of Seat Climate Control Module, Electrical Connections & Tie Straps
    GM1402018Courtesy of GENERAL MOTORS CORP.
About FixVault