Installation Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the TAC module.
- Install the TAC module nuts.
Tighten: Tighten the nuts to 9 N.m (80 lb in).
- Connect the engine wiring harness electrical connector (1).
- Install the red CPA retainer.
- Connect the I/P harness electrical connector (2).
NOTE:
Refer to Fastener Notice
in Cautions and Notices.