FixVault
Home › Cadillac › 2003 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 468 (Supplemental Inflatable Restraint System) › Repair Instructions › Inflatable Restraint Instrument Panel Module Replacement › Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Inflatable Restraint Instrument Panel Module
    GM915018Courtesy of GENERAL MOTORS CORP.
  1. Install the inflatable restraint I/P module to the I/P.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the nuts to the inflatable restraint I/P module.

    Install the top nuts first then the lower ones second.

    Tighten:  Tighten the nuts to 9 N.m (80 lb in).

  3. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 5 .
  4. Secure the inflator module connector to the I/P structure.
  5. Install the upper I/P trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Upper in Instrument Panel, Gages and Console.
About FixVault