FixVault
Home › Cadillac › 2003 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 480 (HVAC Systems - Automatic) › Repair Instructions › Inside Air Temperature Sensor Assembly Replacement › Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left windshield garnish molding. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.
  2. Remove the left center pillar assist handle. Refer to Assist Handle Replacement - Rear in Interior Trim.
  3. Remove the left center pillar garnish molding. Refer to Garnish Molding Replacement - Center Pillar in Interior Trim.
  4. Remove the left sunshade. Refer to Sunshade Replacement in Interior Trim.
  5. Gently pull down the headliner.
    6. Fig 1: View Of Inside Air Temperature Sensor Electrical Connector
    GM675996Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the electrical connector from the inside air temperature sensor.
  7. Partially remove the inside air temperature sensor from the headliner.
  8. Remove the sensor grille from the inside air temperature sensor.
    9. Fig 2: View Of Inside Air Temperature Sensor
    GM675994Courtesy of GENERAL MOTORS CORP.
  9. Remove the inside air temperature sensor from the headliner.
About FixVault