FixVault
Home › Cadillac › 2003 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 493 (Body Rear End) › Repair Instructions › Liftgate Replacement › Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. With an assistant, install the lift gate to the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts that retain the lift gate to the body.

    Tighten:  Tighten the bolts to 25 N.m (18 lb ft).

    3. Fig 1: Installing Liftgate
    GM522132Courtesy of GENERAL MOTORS CORP.
  3. Install the lift gate struts. Refer to Strut Replacement - Liftgate .
  4. Connect the washer fluid hose.
  5. Connect the electrical connectors, as needed.
  6. Install the roof rear header garnish molding. Refer to Garnish Molding Replacement - Rear Upper (Avalanche/Escalade EXT) or Garnish Molding Replacement - Rear Upper (Tahoe/Yukon/Escalade/Suburban) in Interior Trim.
About FixVault