Installation Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the stabilizer shaft link insulators and spacers (2).
- Perform the following procedure before installing the stabilizer link bolts.
- Remove all traces of the original adhesive patch.
- Apply Threadlocker GM P/N 12345382 (Canadian P/N 10953489) BLUE LOCTITE # 242 on the threads of the bolts.
- Install the stabilizer shaft link bolts (3).
- Install the stabilizer shaft nut (1) to the link bolt.
Tighten: Tighten the nut to 10 N.m (89 lb in).
- Remove the safety stands
- Lower the vehicle.
NOTE:
Refer to Fastener Notice in Cautions and Notices.