FixVault
Home › Cadillac › 2003 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 637 (Engine Controls - 3.6L - Introduction) › Repair Instructions › Air Cleaner Assembly Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition OFF.
  2. Remove the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .
  3. Disconnect the mass air flow (MAF) electrical connector.
    4. Fig 1: Removing Air Cleaner Bolts
    GM1201221Courtesy of GENERAL MOTORS CORP.
  4. Remove the air cleaner bolts.
  5. Remove the air cleaner.
About FixVault