FixVault
Home › Cadillac › 2003 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 637 (Engine Controls - 3.6L - Introduction) › Repair Instructions › Intake Manifold Runner Control Solenoid Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: DO NOT separate the upper intake manifold from the lower intake manifold.
  1. Remove the upper intake manifold with the lower intake manifold. Refer to Intake Manifold Replacement - Lower in Engine Mechanical - 3.6L (LY7).
    2. Fig 1: Removing Intake Manifold Runner Control Solenoid Bolts
    GM1285195Courtesy of GENERAL MOTORS CORP.
  2. Remove the intake manifold runner control solenoid bolts.
  3. Remove the intake manifold runner control solenoid.
About FixVault