FixVault
Home › Cadillac › 2003 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 639 (Supplemental Inflatable Restraint System) › Repair Instructions › Inflatable Restraint Side Impact Module Wiring Harness Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Inflatable Restraint Side Impact Module & Seat
    GM513378Courtesy of GENERAL MOTORS CORP.
  1. Install the new side impact module wiring harness (3) to the seat (1).
  2. Install the retaining clips that fasten the side impact module wiring harness (3) to the seat (1).
  3. Install the side impact module (2) to the seat (1). Refer to Inflatable Restraint Side Impact Module Replacement - Front .
  4. Install the seat back panel.
  5. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 7  for driver's seat or SIR Disabling and Enabling Zone 9  for passenger seat.
About FixVault