FixVault
Home › Cadillac › 2003 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 639 (Supplemental Inflatable Restraint System) › Repair Instructions › SIR Disabling and Enabling Zone 7 › Disabling Procedure

Disabling Procedure

WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
  2. Turn the ignition switch to the OFF position.
  3. Remove the key from the ignition switch.
    4. Fig 1: View Of Under Rear Seat (Right Rear Fuse Center)
    GM816858Courtesy of GENERAL MOTORS CORP.
  4. Remove the rear seat. Refer to Seat Cushion Replacement - Rear in Seats.
  5. Locate the right rear fuse center (1) under rear seat, then remove the fuse center top cover.
    6. IMPORTANT: With the SIR fuse removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is normal operation, and does not indicate an SIR system malfunction.
  6. Locate and remove the SIR fuse from the right rear fuse center.
  7. Remove both connector position assurance (CPA) from the LF/driver side impact module and seat belt pretensioner yellow connector (1) which is located under the front of driver seat.
    8. Fig 2: Locating Side Impact Module & Pretensioner Yellow Connector
    GM816853Courtesy of GENERAL MOTORS CORP.
  8. Disconnect the LF side impact module and pretensioner yellow connector (1) from the vehicle harness yellow connector.
About FixVault