Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Install the blower motor control processor.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Fig 1: Installing Blower Motor Control Processor Retaining Screw

Courtesy of GENERAL MOTORS CORP.

Install the blower motor control processor retaining screw (1).
Tighten: Tighten the screw to 1 N.m (9 lb in).

Fig 2: Connecting Electrical Connector To Blower Motor Control Processor

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector to the blower motor control processor.
Install the right sound insulator. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gages, and Console.