FixVault
Home › Cadillac › 2003 › Seville SLS › Repair and Diagnosis › External Pages › Different car › Section 418 (Seat System) › Repair Instructions › Heated Seat Control Module Replacement - Rear › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the heated seat control module (2) to the seat back.
    NOTE: Refer to FASTENER NOTICE
  2. Install the heated seat control module fasteners (1).

    Tighten 

    Tighten the rear heated seat control module to 1.5 N.m (13 lb in).

  3. Connect the heated seat control module electrical connections.
  4. Install the rear seat back. Refer to SEAT BACK REPLACEMENT - REAR  .
    Fig 1: Installing Heated Seat Control Module
    G02100173Courtesy of GENERAL MOTORS CORP.
About FixVault