Removal Procedure
WARNING: This page is about a different car, the 2004 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.
- Turn OFF the ignition.
- Remove the rear compartment trim. Refer to Compartment Trim Panel Replacement - Rear in Body Rear End.
- To access the mounting nuts, remove the rear trim panel shelf. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.
- Remove the 2 yaw rate sensor mounting nuts.
- Disconnect the yaw rate sensor electrical connector.
- Remove the yaw rate sensor from the mounting studs.