FixVault
Home › Cadillac › 2003 › Seville SLS › Repair and Diagnosis › External Pages › Different car › Section 495 (Lighting Systems (Introduction)) › Repair Instructions › Hazard Warning Switch Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Hazard Switch
    GM562257Courtesy of GENERAL MOTORS CORP.
  1. Press the hazard switch into the bezel until the locking tabs lock.
    2. Fig 2: View of Hazard Warning Switch Electrical Connector
    GM488586Courtesy of GENERAL MOTORS CORP.
  2. Connect the hazard switch electrical connector.
  3. Install the instrument panel right accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory Right (LHD) or Trim Plate Replacement - Instrument Panel (I/P) Accessory Right (RHD) in Instrument Panel, Gages and Console.
About FixVault