FixVault
Home › Cadillac › 2003 › Seville SLS › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle - 4T80-E › Repair Instructions › Oil Pressure Test Plug Replacement › Installation Procedure

Installation Procedure

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Install the oil pressure test plug (1).

    Tighten 

    Tighten the oil pressure test plug to 22 N.m (16 lb ft).

    Fig 1: Installing Oil Pressure Test Plug
    G02177990Courtesy of GENERAL MOTORS CORP.
  2. Install the throttle body air inlet duct. Refer to AIR CLEANER INTAKE DUCT in Removal & Installation.
About FixVault