Installation Procedure

Install the theft deterrent control module onto the ignition lock cylinder case assembly.
CAUTION: Refer to SIR Inflator Module Coil Caution in Cautions and Notices.
Connect the connector to the theft deterrent control module.

Fig 1: Identifying Theft Deterrent Control Module
Courtesy of GENERAL MOTORS CORP.
If necessary, connect the connector to the ignition lock cylinder case.
Install the lock cylinder. Refer to Ignition Lock Cylinder Replacement in Steering Wheel and Column.
Install the upper and lower trim covers. Refer to Steering Column Trim Covers Replacement in Steering Wheel and Column.
Enable the inflatable restraint steering wheel module. Refer to SIR Disabling and Enabling Zone 3 in SIR.
Program the theft deterrent system. Refer to Programming Theft Deterrent System Components .