FixVault
Home › Cadillac › 2004 › CTS Base, 3.2 N › Repair and Diagnosis › Body & Frame › Windows › Door System, Mirror System & Window System › Repair Instructions › Power Mirror Switch Replacement › Removal Procedure

Removal Procedure

    Fig 1: Inserting Flat Bladed Tool Under Front Edge Of Front Door Switch
    GM754073Courtesy of GENERAL MOTORS CORP.
  1. Insert a flat bladed tool under the front edge of the front door switch.
  2. Push the tool firmly towards the switch to disengage the retainer.
  3. Lift up on the rear of the switch plate to remove it from the door trim panel.
  4. Disconnect electrical connectors.
    5. Fig 2: Removing Switch From Bezel
    GM754069Courtesy of GENERAL MOTORS CORP.
  5. Remove the appropriate switch from the bezel by disengaging the side snap walls with a small flat bladed tool.
About FixVault