FixVault
Home › Cadillac › 2004 › CTS Base, 3.2 N › Repair and Diagnosis › Engine Performance › System › Engine Controls - 2.6L & 3.2L - Introduction › Repair Instructions › Intake Resonance Switchover Solenoid Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Intake Resonance Switchover Solenoid
    GM819412Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the following from the intake resonance switchover solenoid:
    • The electrical connector
      • IMPORTANT: Observe the proper positions of the vacuum hoses.
    • The vacuum hoses
  2. Remove the intake resonance switchover solenoid screws.
  3. Remove the intake resonance switchover solenoid from the intake air resonator.
About FixVault