FixVault
Home › Cadillac › 2004 › CTS Base, 3.6 7 › Repair and Diagnosis › Engine Performance › System › Engine Controls - 3.6L - Introduction › Repair Instructions › Intake Manifold Runner Control Solenoid Replacement › Removal Procedure

Removal Procedure

    IMPORTANT: DO NOT separate the upper intake manifold from the lower intake manifold.
  1. Remove the upper intake manifold with the lower intake manifold. Refer to Intake Manifold Replacement - Lower in Engine Mechanical - 3.6L (LY7).
    2. Fig 1: Removing Intake Manifold Runner Control Solenoid Bolts
    GM1285195Courtesy of GENERAL MOTORS CORP.
  2. Remove the intake manifold runner control solenoid bolts.
  3. Remove the intake manifold runner control solenoid.
About FixVault