Installation Procedure

Install the TV module (1) to the rear shelf.

Fig 1: Removing & Installing TV Antenna Module
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.
Install the fasteners securing the TV module to the rear shelf.
Tighten: Tighten the fasteners to 9 N.m (80 lb in).
Connect the coax cables (3) to the TV module.

Fig 2: Identifying Coax Cables
Courtesy of GENERAL MOTORS CORP.
Connect the electrical connector (1).

Fig 3: Locating TV Module Electrical Connector
Courtesy of GENERAL MOTORS CORP.
Reinstall the rear shelf. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.