FixVault
Home › Cadillac › 2004 › CTS V › Repair and Diagnosis › Engine Performance › System › Engine Controls - 5.7L - Introduction › Repair Instructions › Manifold Absolute Pressure (MAP) Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Disconnecting MAP Sensor Electrical Connector
    GM55819Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement in Engine Mechanical - 5.7L.
  2. Disconnect the MAP sensor electrical connector.
    3. Fig 2: Manifold Absolute Pressure (MAP) Sensor
    GM58838Courtesy of GENERAL MOTORS CORP.
  3. Pull the MAP sensor forward in order to release the sensor from the retainer.
  4. Lift the MAP sensor upward.
About FixVault