FixVault
Home › Cadillac › 2004 › CTS V › Repair and Diagnosis › Steering › Steering Wheel & Steering Column › Repair Instructions › Steering Wheel Control Switch Assembly Replacement › Removal Procedure

Removal Procedure

    CAUTION: Refer to SIR Caution in Cautions and Notices.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
  2. Remove the steering wheel inflatable restraint module. Refer to Inflatable Restraint Steering Wheel Module Replacement in SIR.
    3. Fig 1: Disconnecting Electrical Connectors For Steering Wheel Control Switch
    GM754855Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connectors for the steering wheel control switch.
    4. Fig 2: Removing Retaining Screws From Steering Wheel Control Switch
    GM803006Courtesy of GENERAL MOTORS CORP.
  4. Remove the retaining screws from the steering wheel control switch.
  5. Remove the retainer and screw from the steering wheel control harness.
  6. Carefully pull the control switch assembly away from the steering wheel.
  7. Remove the control switch assembly from the steering wheel.
  8. Remove the wire harness from the control switch assembly.
About FixVault