FixVault
Home › Cadillac › 2004 › DeVille Base › Repair and Diagnosis › Suspension › Electronic Suspension › Suspension Control System - Suspension Leveling › Repair Instructions › Automatic Level Control Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Height Sensor, Connector, Ball Stud, Tab & Nut
    GM517954Courtesy of GENERAL MOTORS CORP.
  1. Insert head of the sensor mounting stud into the key hole.
  2. Slide the sensor upward until the anti-rotation tab engages in the lower hole.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Tighten the sensor mounting nut.

    Tighten:  Tighten the nut to 9 N.m (80 lb in).

  4. Connect the sensor link on the ball stud.
  5. Connect the height sensor connector.
  6. Install the wheel on the vehicle. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  7. Lower the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
About FixVault