FixVault

Removal Procedure

  1. Open the door.
  2. Remove the door trim panel. Refer to Trim Panel Replacement - Side Front Door (Standard)  or Trim Panel Replacement - Side Front Door (WC2, WC8) .
  3. Remove the door module. Refer to Door Control Module Replacement .
  4. Remove the water deflector. Refer to Water Deflector Replacement - Front Door .
  5. Remove the door check link cover (2).
  6. Fig 1: View Of Check Link Cover
    GM524040Courtesy of GENERAL MOTORS CORP.
  7. Remove the 2 studs from the door check link arm.
  8. Fig 2: View Of Hinge To Door Nuts
    GM524046Courtesy of GENERAL MOTORS CORP.
  9. Note the position of the arrow on the check link arm to aid in reassembly.
  10. Remove the 2 fasteners from the check link.
  11. Remove the check link through the front access hole of the inner door panel.
  12. Fig 3: View Of Check Link & Fasteners
    GM441767Courtesy of GENERAL MOTORS CORP.