Removal Procedure
- Remove both right and left sides of the reveal molding. Refer to Windshield Side Reveal Molding Replacement .
- Remove the upper windshield reveal molding.
- Use a flat-bladed tool in order to carefully pry the end of the upper reveal molding out about 76 mm (3 in).
- Grasp the corner of the windshield reveal molding by hand or use a suitable tool to slowly pull the reveal molding away from the windshield.
- If the windshield reveal molding will not release, use a utility knife to aid in the releasing of the molding.
CAUTION:
Refer to Glass and Sheet Metal Handling Caution in Cautions and Notices.
IMPORTANT:
The windshield reveal molding fills the cavities between the body and windshield. If the reveal molding is stretched or damaged it and cannot be reused it must be replaced.