FixVault
Home › Cadillac › 2004 › Escalade EXT › Repair and Diagnosis › Drivelines & Axles › Differentials & Drive Axles › Front Drive Axle › Repair Instructions › Shield Replacement › Installation Procedure

Installation Procedure

  1. Install the front differential carrier shield.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the front differential carrier shield bolts.

    Tighten:  Tighten the front differential carrier shield bolts to 20 N.m (15 lb ft).

    3. Fig 1: View Of Front Differential Carrier Shield & Bolts
    GM339429Courtesy of GENERAL MOTORS CORP.
  3. Lower the vehicle.
About FixVault