FixVault
Home › Cadillac › 2004 › Escalade EXT › Repair and Diagnosis › Electrical › Instrument Panel System Displays, Gauges And Console › Repair Instructions › Center Console End Panel Replacement › Installation Procedure

Installation Procedure

  1. Install the power outlets to the end panel, if equipped. Refer to Accessory Power Receptacle Replacement - 12 Volt in Power Outlets.
  2. Install the rear seat audio control, if equipped. Refer to Audio Control Replacement - Rear Seat in Entertainment.
  3. Install the rear seat heater switch, if equipped. Refer to Heated Seat Switch Replacement - Rear in Seats.
  4. Connect all electrical connectors.
  5. Install the end panel to the console.
    6. NOTE: Refer to Fastener Notice in Cautions and Notices.
  6. Install the 2 top retaining screws.

    Tighten:  Tighten the screws to 1.6 N.m (14 lb in).

    7. Fig 1: Installing Center Console End Panel Top Retaining Screws
    GM882652Courtesy of GENERAL MOTORS CORP.
  7. Install the 2 retaining screws.

    Tighten:  Tighten the screws to 1.6 N.m (14 lb in).

    8. Fig 2: Installing Center Console End Panel Retaining Screws
    GM882669Courtesy of GENERAL MOTORS CORP.
  8. Install the rear cupholder to the end panel. Refer to Cupholder Replacement (Non-Luxury)  or Cupholder Replacement (Luxury)  or Cupholder Replacement (Rear)  or Cupholder Replacement (Platinum) .
  9. Install the storage bin. Refer to Console Storage Bin Replacement (Except Pro) .
About FixVault