FixVault
Home › Cadillac › 2004 › Escalade EXT › Repair and Diagnosis › Engine Performance › System › Engine Control System - 4.8L, 5.3L & 6.0L (Introduction) › Repair Instructions › Camshaft Position (CMP) Sensor Replacement › Removal Procedure

Removal Procedure

IMPORTANT: Clean the area around the camshaft position (CMP) sensor before removal in order to prevent debris from entering the engine.
    Fig 1: View Of Camshaft Position (CMP) Sensor & Bolt
    GM260128Courtesy of GENERAL MOTORS CORP.
  1. Remove the CMP sensor bolt.
  2. Remove the CMP sensor.
About FixVault