FixVault
Home › Cadillac › 2004 › Escalade EXT › Repair and Diagnosis › Engine Performance › System › Engine Control System - 4.8L, 5.3L & 6.0L (Introduction) › Repair Instructions › Ignition Coil(s) Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Spark Plug Wires At Ignition Coil
    GM344169Courtesy of GENERAL MOTORS CORP.
  1. Remove the spark plug wire from the ignition coil.
    2. Fig 2: View of Ignition Coil Harness Connector
    GM339299Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the ignition coil electrical connector.
    3. Fig 3: View Of Ignition Coil Mounting Bolts
    GM344167Courtesy of GENERAL MOTORS CORP.
  3. Remove the ignition coil bolts.
    4. Fig 4: View Of Ignition Coils & Spark Plug Wires
    GM339300Courtesy of GENERAL MOTORS CORP.
  4. Remove the ignition coil.
About FixVault