FixVault
Home › Cadillac › 2004 › Escalade EXT › Repair and Diagnosis › Engine Performance › System › Engine Control System - 4.8L, 5.3L & 6.0L (Introduction) › Repair Instructions › Knock Sensor (KS) Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Rubber Covers
    GM832149Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake manifold. Refer to Intake Manifold Replacement in Engine Mechanical-4.8L, 5.3L, and 6.0L.
  2. Gently pry up the rubber covers.
  3. Disconnect the knock sensor electrical connectors.
    4. Fig 2: View Of Knock Sensors
    GM309864Courtesy of GENERAL MOTORS CORP.
  4. Remove the knock sensors.
About FixVault