FixVault
Home › Cadillac › 2004 › Escalade EXT › Repair and Diagnosis › Restraints › Air Bag, SRS › Supplemental Inflatable Restraint System › Repair Instructions › Inflatable Restraint Front End Sensor Replacement › Removal Procedure

Removal Procedure

    CAUTION: Do not strike or jolt the inflatable restraint front end sensor. Before applying power to the front end sensor make sure that it is securely fastened. Failure to observe the correct installation procedure could cause SIR deployment, personal injury, or unnecessary SIR system repairs.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 1 .
    2. Fig 1: View Of Front End Sensor Connector & Frame Crossmember
    GM859932Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector.
  3. Remove the connector position assurance (CPA) from the connector.
  4. Remove the sensor bolt.
  5. Remove the sensor (2) from the vehicle.
About FixVault