Installation Procedure

Fig 1: View Of Seat Belt Anchor Bolt - Center Rear

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the bolt (1) to the seat belt anchor.
Tighten: Tighten the bolt to 52 N.m (38 lb ft).

Fig 2: View Of Seat Belt Retractor - Center Rear

Courtesy of GENERAL MOTORS CORP.

Install the nut to the seat belt retractor.
Tighten: Tighten the nut to 52 N.m (38 lb ft).
Install the J-Clip under the center armrest.

Fig 3: View Of Seat Belt Guide Cover - Center Rear

Courtesy of GENERAL MOTORS CORP.

Install the rear seat armrest. Refer to Armrest Replacement - Rear Seat (Bucket) or Armrest Replacement - Rear Seat (60/40 Split) in Seats.
Install the seat belt guide cover (1).