FixVault
Home › Cadillac › 2004 › Seville › Repair and Diagnosis › Engine Performance › System › Engine Controls -- 4.6L - Introduction › Repair Instructions › Idle Air Control (IAC) Valve Replacement › Removal Procedure

Removal Procedure

    Fig 1: IAC Connector and TP Sensor
    GM574138Courtesy of GENERAL MOTORS CORP.
  1. Remove the electrical connector (1) from the IAC valve (4).
    2. Fig 2: Identifying Idler Air Control Valve & Attaching Screws
    GM596334Courtesy of GENERAL MOTORS CORP.
  2. Remove the IAC valve attaching screws (2) from the idle air control valve (1).
    3. Fig 3: View of IAC O-Ring
    GM481091Courtesy of GENERAL MOTORS CORP.
  3. Remove the IAC valve from the throttle body.
  4. Remove the IAC valve O-ring.
About FixVault