FixVault
Home › Cadillac › 2004 › Seville › Repair and Diagnosis › Engine Performance › System › Engine Controls -- 4.6L - Introduction › Repair Instructions › Manifold Absolute Pressure (MAP) Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: MAP, IAC, ECT, TP Sensors
    GM602335Courtesy of GENERAL MOTORS CORP.
  1. Install the MAP sensor (1) into the intake manifold.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the throttle cable bracket and bolts.

    Tighten:  Tighten the bracket bolts to 12 N.m (106 lb in).

  3. Connect the MAP sensor electrical connector.
About FixVault