Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Steering Wheel Module & Components

Courtesy of GENERAL MOTORS CORP.

Connect the horn electrical connector (2).
Connect the inflator module electrical connector (4). Install the CPA to the driver inflator module electrical connector.
IMPORTANT: Route the driver inflator wires and the horn wires correctly.
Align the driver inflator module retainers to the steering wheel.
Push the driver inflator module (5) firmly to the steering wheel in order to engage the drivers inflator retainers.
Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 .