Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Washer Pump & Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Position the new washer solvent container level sensor grommet into the washer solvent container.
Use the washer solvent as a lubricant on the grommet in order to ease the installation of the washer solvent container level sensor.
Install the level sensor into the grommet and apply equal pressure in order to secure the level sensor to the grommet.
Connect the electrical connector to the washer solvent container level sensor.
Verify the operation of the level sensor.

Fig 2: View Of Right Front Fascia Extension & Fasteners

Courtesy of GENERAL MOTORS CORP.

Install the right front fascia extension (2). Refer to Fascia Extension Replacement - Front in Bumpers.